 |
|||||||||
 |
|||||||||
| Split ferrite pair unified in a convenient nylon enclosure clamp. Adhesive mounting pad provides quick and easy installation on most surfaces. For flat cables up to 40 conductors. |
|||||||||
 |
|||||||||
| Click on part numbers to see performance charts. | |||||||||
 |
|||||||||
| Split ferrite pair unified in a convenient nylon enclosure clamp. Single spring-load mounting post can be pressed securely into a .250" (6,4mm) diameter hole pre-cut in substrates up to .070" (1,8mm) thickness. For flat cables up to 40 conductors. |
|||||||||
 |
|||||||||
| Click on part numbers to see performance charts. | |||||||||
 |
|||||||||
| Split ferrite pair assembled into two plastic end clips providing an overall low profile. Adhesive mounting pads on each plastic clip provide convenient installation on most surfaces. For flat cables up to 50 conductors. |
|||||||||
 |
|||||||||
| Click on part numbers to see performance charts. | |||||||||
 |
 |
||||||||
| Split ferrite pair assembled into two plastic end clips providing an overall low profile. Hardware mounting slots provide convenient mounting in .125" (3,2mm) diameter holes. For flat cables up to 50 conductors. |
|||||||||
 |
|||||||||
| Click on part numbers to see performance charts. | |||||||||
 |
 |
||||||||
|
More Ferrites
|
|||||||||